ASMTower was developed in ASMTechnologies by tower design experts to facilitate the design of towers and their foundations and the preparation of their fabrication drawings.

ASMTower makes tower design according to ANSI/TIA-222-G & H.

  • Structure data entry by the user.
  • Load calculation by the software.
  • Creating FE model and analyze it by the software.
  • Members and bolt connections check by the software.
  • Detailed report creation by the software.

ASMTower analyzes and designs towers using ANSI/TIA-222-H or ANSI/TIA-222-G. ASMTower generates automatically the Dead load, Wind load, Ice load and Guy load on overall the structure. Creating a 3D frame-truss models for the structure and calculates the straining actions on all members and tower deformation.

ASMTower generates a full 3D view for the structure, appurtenances, transmission lines and ladders. This presentation facilitates the review of the structure and gives a real view for it.

Guyed Pole Model in ASMTower
Latticed Tower Model in ASMTower
3Leg Mast With Struts Model in ASMTower
Pole Carrying Satellite Dish Model in ASMTower
  • Three or four sided self-supporting towers.
  • Three or four sided guyed towers.
  • All Types of tapered/Stepped monopoles (round ,20-sided, 18-sided, 16-sided, 12-sided and 8-sided).
  • Guyed poles.
  • Structures with strut members (usually used in roof top structures).

Also, the structure can include combination of above types.